Brands
 
Shopping Cart
0 items
 

Compass Model Warp 360 Helicopter Combo Kit w/Motor, ESC, Servos & CF Blades

Compass Model Warp 360 Helicopter Combo Kit w/Motor, ESC, Servos & CF Blades
Click to enlarge
Price: $560.00
Availability: In Stock
Model: CPSWARP360COMBO
Manufacturer: Compass Model
Average Rating: Not Rated

This is the Compass Model Warp 360 Helicopter Combo Kit. Add your own battery and receiver and you will have everything you need to get your Warp 360 Combo ready to fly. The combo comes with 4 metal gear, aluminum case high speed servos for the fastest and most precise performance. The included compass 60 amp ESC is equipped with a high performance governor that gives you the most consistent power throughout the flight. With the included TracX Flybarless unit, setup is a breeze, you can also download files from other pilots on the compass team to use their Warp 360 profiles.

The WARP 360 is an electric helicopter of the coming 360 size. The single-stage belt drive provides a very quiet and smooth running. The almost rigid rotor head provides a very straight and aggressive response. Packs of 3 to 6S can be used but Compass Model recommends a 4S or 6S battery setup to use the full potential of the larger rotor without straining the batteries with high currents.

 

The belt width is 6mm and the large pulley avoids the belt from skipping, even with low belt tensions. The stylish carbon fiber landing struts fit very well with the look of the modern frame design and the canopy. The Warp 360 is a pure flybarless helicopter - equipped with an appropriate and ideally adapted geometry of swashplate and blade grip arms. The simple and clean design was made to fit different RC equipment and to guarantee easy maintenance.

Warp 360 Features:

  • Absolute 3D capability
  • One of the lightest helicopter in its class
  • ECCPM precise aluminum 120° - Swashplate
  • Almost rigid rotor head without rubber or polyurethane damping elements
  • Aluminum / carbon fiber tail rotor
  • Extremely robust carbon fiber chassis
  • 6mm wide main drive belt
  • Easy installation and maintenance
  • Low Part Count
  • Painted fiberglass canopy
  • 17mm tail boom, makes tail supports unnecessary
  • Absolute 3D capability
  • One of the lightest helicopter in its class
  • ECCPM precise aluminum 120° - Swashplate
  • Almost rigid rotor head without rubber or polyurethane damping elements
  • Aluminum / carbon fiber tail rotor
  • Extremely robust carbon fiber chassis
  • 6mm wide main drive belt
  • Easy installation and maintenance
  • Low Part Count
  • Painted fiberglass canopy
  • 17mm tail boom, makes tail supports unnecessary

TracX Flybarless Unit Features:

  • Single piece unit (34x29x14mm)
  • For nitro and electric Helicopters
  • Latest gyro technology
  • Vibration insensitive
  • Easy to setup with PC software
  • Advanced panel for fine tuning
  • Supports: Futaba S-Bus, Double Spektrum Satellites (DSM2, DSMX)
  • Support up to 560Hz cyclic servos
  • Support up to 560Hz/760µs tail servo
  • Build in governor
  • 3 different flight modes switchable from transmitter
  • Autostabilisation functions
  • Front power bus integrated (up to 8.4V)
  • Online firmware updateable
  • Flight mode status LED
  • Onboard micro usb connector

Warp 360 Specifications:
Length: 693 mm
Height: 220 mm
Width: 105 mm
Rotor Diameter: 780 - 800 mm
Gear Ratio: (16T) 8,43:1:4.8
Take-off weight: 920 - 1030g with battery
Motor size: 6S (1200-1400kV) - 4S (2100kV-2400kV)
Motor Type: Electric
Blades: 320 - 360mm

TracX Flybarless Unit Specifications:
Dimensions:
34x29x14mm
Weight:
13 g
Operating Voltage:
4.8-8.4V
Current Consumption: 40 mA
Sensors: InvenSense MPU-6000
RC-Inputs: 3 regular JR/Futaba connections + 1 triple JR/Futaba RX connector
PPM-Sum Input: yes
Futaba S-Bus Input: yes
Spektrum-Satellite Connections: 2
Additional Channels with PPM-Sum: 1
Setup by: PC
Supported Swashplates:

  • 2 Aileron/ 1 Elevator-Servo
  • 3 Servos 90°
  • 3 Servos 120°
  • 3 Servos 135°
  • 3 Servos 140°

Virtual Swashplate Rotation: yes
Tail-gain Adjustable by TX: yes
Switchable Setups by TX: 3
Horizontal Stabilization Normal Flight: yes
Horizontal Stabilization Inverted Flight: yes
Tail-servo Mid Point: 1.520 and 760 µs
Integrated Governor: yes

Combo Includes:

  • Warp 360 w/Airframe, Motor and CF Blades
  • (4) Compass Aluminum Case servos
  • Compass 60A ESC
  • Compass TracX Flybarless System

Needed to Complete:

  • Helicopter Transmitter & Receiver 
  • (1) 6S 1000-1300mAh LiPo Battery 
  • Compatible Battery Charger
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.